Products

Product

HS1000 Type

Rich configuration, wide applicability, suitable for different usage situations

  1. Principle of operation of the HANSUNG electromagnetic water meter:
    • Electromagnetic water meter is a type of meter used to control the flow of wastewater, clean water, or other liquids … based on the principle of magnetic field when fluid passes through the sensors at both ends of the electrode produces an induced electrodynamic rate proportional to the velocity of the fluid flowing through the sensor, the obtained parameters are transmitted and displayed on the screen.
    • Because whenever fluid passes through the sensors, it generates electrodynamic rate, so it sends the results to the screen, so the meter can measure the water flow in both directions, we should pay attention when installing and operating.
  2. Advantages and Disadvantages of the HANSUNG electromagnetic water meter.
    1. Advantages.
      • By an smart, optimal design, the accuracy of the meter is increasingly improved.
      • Measurement results will be displayed on the electronic screen, making it easy to statistic the measurement results.
      • In the detached version, the dial can be placed in the control center cabinet, connected by signal cables.
      • Cast iron body construction (316 stainless steel option available) and PTFE liner for extended meter life.
    2. Disadvantage.
      • Since it is an electronic device, the meter needs a fixed power source for continuous operation.
      • In addition, the meter dial contains electronic devices, although with the IP68 waterproof and dust proof level, for extended life of the meter, we should not immerse the meter dial completely submerged in water.
      • In addition to the utility, the price of electromagnetic flow meter is often more expensive than other meters of the same size on the market.
  3. Some notes when using the HANSUNG electromagnetic water meter.
    1. In addition to the utility, the price of electromagnetic water meter is often more expensive than other meters of the same size on the market.
      • When pipes have lower than average fluid rates (excluding special cases, their own designs will be available). Another case is that the fluid velocity is too small, the results will be inaccurate, usually below 5%.
      • It contains gas, air in the ducts. Then, it changed the volume of the pipe and the fluid falsify the results.
      • Repeating the opening and closing of the fluid continuously for a short period of time as it increases the lag between the starting flow and the indicated velocity of the measuring device.
      • The flow meter will not work if the fluid used is magnetic or used to measure gas flow. In fact, when the velocity of the fluid with the mean conductivity is low, the meter does not work well. The reason is that due to the difference, the internal resistance of the sensor must be identical with the input resistance of the device.
      • Finally when fluiding by saline or seawater.
    2. Note when installing pipes.
      • Compared with other flow meters, the HANSUNG Electronic Water  Meter requires less straight pipe running, normally, the ratio when pre-installation is 7D and after-installation is 2D.
      • To limit swirl and reduce air overflow, it is recommended to install the meter vertically.
    3. Select the appropriate metering range.
      • According to the parameter 0.09 to 10m / s is the operating range of the meter as given by the manufacturer, but to ensure longevity and accuracy, let the device operate under the conditions of measuring average speed in the metering range at 60% of the maximum value.
      • Specifications of Woteck electromagnetic water meter:
        • Manufacturing brand: HANSUNG
        • Origin: Korea
        • Function: Instantaneous water measurement and total  measurement
        • Meter dimensions: DN25 -DN500,…
        • Valve body: Cast iron
        • Connection type: Standard flanges DIN PN16
        • Point contact: Stainless steel 316L
        • Used voltage: 220VAC
        • Control signals: 4 – 20mA
        • Meter lining: FEP
        • Working temperature : T50
        • Working pressure: PN16
        • Working environment: water, wastewater, hot water, steam, …
        • Display screen: LCD, 2 lines 16 characters
        • Waterproof standard IP68
        • Tolerance: Class 2

 

 

Main Specifications/ Special Features:

  • Structure: sensor and probe, together with LCD display
  • No pressure loss due to no internal moving parts.
  • Anti-corrosion, anti-wear.
  • High accuracy.
  • Stable performance, high anti-vibration level.
  • Operates according to Faraday’s law of electromagnetic induction.
  • Can be used to accurately measure the flow rate of conductive, highly corrosive and chemical fluids.
  • Widely used in petroleum, chemical engineering, pharmacy, papermaking, electrical energy and environmental protection industries.
  • Explosion Prevention Standard: ExdIIBT4.
  • Size: DN10 to DN500
  • Standard pressure: 1.0Mpa to 40mPa
  • Accuracy: ± 0.5 to 1.0%
  • Power supply: 85 to 250V AC (45 to 63Hz) and 16 to 36V DC
  • Output current: 0 to 10 or 4 to 20mA
  • Output frequency: 0 to 5,000Hz with photoelectric isolation
  • Pulse output: 0.001 to 1,000m 3/cp, 0.001 to 1,000L/cp, 0.001 to 1,000USG / cp and 0.001 to 1,000 UKG/cp
  • Alarm output (with photoelectric isolation)
  • Upper Alarm: ALMH
  • Lower alarm: ALML
  • Communication: 4-20mA RS485 (Modbus)
  • Operating conditions: Ambient temperature: -10 to 60 ° C
  • Relative humidity: ≤85% RH
  • Atmospheric pressure: 86 to 106kPa
  • Applicable liquid: conductive liquid
  • Liquid temperature: T50

  • Conductivity: 5μs/cm

pdf icon HANSUNG-1.pdf